RTA Cabinet Mall    ADI Supply of Alert Data, Inc  386-761-4946


Manhattan Maple Assembly Pics

Standard 15" Base

Back to Manhattan Maple

  ID parts before starting

Face frame goes face down on soft surface (to protect from scratches) 

Side panels snap into face frame

insert locking screw into all metal "L" brackets after they have been snapped into place.

slide floor panel into side panel grooves


snap in  and lock back panel 



set shelf clips and shelf

drawer box requires assembly. screwed rabbit joints with captured "floating" 1/2" plywood floor


insert and screw in the drawer guide back brackets (pre drilled holes in back panel)

slide drawer guide into back bracket

use beveled head screws to attach front of drawer guide to face frame (see pre drilled holes)

note how drawer box attaches to drawer guides

steel hook on drawer guide go into the predrilled hole on the back side of the drawer box

steel pin on forward drawer guide snaps into predrilled hole on bottom edge of drawer box side

screw on counter top brackets

attach quiet pads

Doors are pre hung on face frames - Manhattan drawer box shipped  unassembled - base cabinets should take about 15 minutes to assemble, wall cabinets go a little quicker.

Questions? call GRANGER DAVIS


Back to Manhattan Maple



Offices in Daytona Beach, FL 386-761-4946 fax 888-761-8050

Office Hours Monday thru Friday 9:00am to 4:00pm EST